Battery strapping tools
Handheld strapping, done in seconds.
7 battery-powered tools from Transpak, across the Helios and Kronos ranges. PP and PET strapping from 9 to 19mm, up to 400kg tension. Supplied, supported and serviced by our engineers.
All tools
Find the right tool.
Two ranges: Helios for speed and value, Kronos for digital control and heavier tension. Tell us your strap width, pack type and tension and we'll point you at the right one.
H-45L-1-09
Your loads take 9mm strap and you want the fastest cycle we stock. Sub-3-second tension, seal and cut on PP or PET, up to 250kg. The lightest-strap option in the Helios range.
H-45L-1-12
You run 11 to 13mm strap on general pallet, timber or board work. Same sub-3-second Helios cycle and 250kg tension, sized for mid-width strap.
H-45L-1-16
Your packs need 15 to 16mm strap but you still want Helios speed. Up to 250kg tension on PP or PET, the widest strap the Helios head takes.
H-46A-12
You want digital control on 11 to 13mm strap. Touch panel with tension setting, cycle counter and error codes, brushless motor, 40 to 250kg. Good for lines that change strap spec often.
H-46A-16
You want the same digital Kronos control on 15 to 16mm strap. 40 to 250kg tension with auto, semi-auto, manual and soft modes for mixed pack types.
H-46B-16
Your loads need real tension. Heavy-duty Kronos on 15 to 16mm strap, up to 400kg, taking thicker PP up to 1.30mm. For dense or heavy packs a 250kg tool won't hold.
H-46B-19
The widest and heaviest-duty tool we stock. 19mm strap, up to 400kg tension, thick PP or PET. For construction, brick, steel and heavy timber loads.
Buying from us
The tool is one part of it.
A hand tool is only as good as the support behind it. Every tool ships ready to run, and our engineers keep it running.
Battery and charger included
Every tool ships with a Bosch 18V Li-Ion battery and charger. Spare batteries and 110V or 240V chargers available on request.
Operator training
We show your team how to load strap, set tension and sealing time, and run the tool properly on handover.
Servicing and repair
Tools needing repair or servicing go to our trusted repair partner. We arrange it and manage it for you, so you keep one point of contact.
Ongoing support
The engineers who supplied the tool answer the phone when you need them. Parts, spares and advice from one place.
Keep it running
Everything the tool needs after day one.
Tools wear. Strap runs out. Operators change. We cover all of it from the same place you bought the tool.
Not sure which tool fits your strap and loads?
Tell us your strap width, pack type and tension. We'll recommend the right tool honestly.
Enquire about
-